NUT BUSTER Hydraulic Monster Wrench
The HTW50 machine is designed to remove and tighten piston and cylinder neck nuts. In this way, by placing two cylinders against each other, a torque is generated and the nut is opened by means of a fast rotating motor.
The nut booster machine is actually a special workbench for repairing hydraulic cylinders. This table includes an upper part that separates them from the cylinder head by creating a strong twisting torque around the seal and throat of heavy hydraulic cylinders. This equipment is for repairing and rebuilding hydraulic cylinders of industries such as; it is used in mining, oil and gas, marine and construction. The amount of torque created is equal to the maximum value of 50,000 lb-ft, which can be used for a wide range of types of nuts and throats of cylinders. Despite the attachments and accessories of this device that are easy to install and use, we can safely say that there is nothing that this device cannot handle. In addition, customers will receive a manual for safety, maintenance and how to use this device.
The Canadian company Hydraulitechs has been able to produce and commercialize this device and the Phoenix Company has the official sales representative of this device in the Middle East region.
Among the features of this device, we can mention the following:
- Rotating base
- Electric control valves
- Pressure gauge with maximum value display
- 600 lb-ft hydraulic motor
- Self-locking hexagonal plates
- Safety guard and safety test
The following items should be mentioned from the product specifications:
- 50,000 pounds-feet torque of the Nut Booster head
- Hydraulic motor torque 600 lb-ft
- 20 feet standard work table (can be customized)
- Standard voltage 220 volts, 3 phases
- Has a 15 gallon hydraulic oil tank
- With hydraulic oil flow of 3 gallons per minute
Device accessories include:
- Hex plates are nut sockets that lock into a holder and facilitate the removal and installation of nuts.
- The front sight holder includes a clip to hold the tension-compression cylinder in front of the sight up to a maximum of 20 inches during disassembly.
- Throat wrench set, this set is designed to grab the cylinder with the teeth of the pipe wrench.
- The holder behind the eye, this holder is installed on the rotating head of the nut booster by locking the page, and the back of the cylinder is fixed to the nut booster using a bolt and nut.
- Lifting jack, this easy-sliding jack consists of aluminum pads that aligns the pipe and its accessories before applying torque.
- Pull/push plate, this joint is used to pull or push the rod assembly into or out of the cylinder.
- Heavy load chain, heavy load chain clamp installed on the work table, is used to secure the cylinder and work with them.